Menu
Item 4 of 22

VDMRacing Straight Cut Gear set Kickstart Top-Qaulity! Puch e50

SKU: VDM-VRV0004
€ 329,95 (including VAT)
This item is sold out.

VDMRacing Straight Cut Gear set Kickstart Top-Qaulity! Puch e50

  • Straight cut gear set.
  • Kickstart engine model.
  • Model for Bearing Bush.
  • Top-Qaulity!
  • VDMRacing!

Benefits of straight cut gears:

  • Less wear (Bearings / Shim washers)
  • Less resistance (More power)
  • Better transfer ratio.
  • Less chance of defects.
  • Stronger.

Information:

  • The gears are hardened (Minimal wear)
  • The Main gear is mounted on the axle with a woodruff key.
  • Weight Main gear+-785 gram.
  • The Main gear has 93 teeth.
  • The clutch bell gear has 20 teeth.

Suitable for:

  • Puch Maxi e50 Kickstart engines.

Overview

Customers also bought

  • Clutch Kickstart Adige Race Puch Maxi e50
    Clutch Kickstart Adige Race Puch Maxi e50

    Clutch Kickstart Adige Race Puch Maxi e50

    ∙ Clutch.
    ∙ Model with internal spring.
    ∙ Adige Race.

    * It is recommended to soak the clutch in ATF oil for 24 hours before assembly.

    * Can only be disassembled with the special…

    € 59,95
    Order
  • Revision set 4-Bearing Old Model Puch Maxi e50
    Revision set 4-Bearing Old Model Puch Maxi e50

    Revision set 4-Bearing Old Model Puch Maxi e50

    Complete revision bearing / seal set for Puch e50 Engine with a old model crankshaft.

    ∙ 3x NTN Bearing 6203C3.
    ∙ 1x NTN Bearing 6203NR.
    ∙ 2x 17 / 40 / 7 Seal.
    ∙ 1x 22 / 40 /…

    € 32,95
    Order
  • Bearing Bush Brass Clutch bell Puch e50
    Bearing Bush Brass Clutch bell Puch e50

    Bearing Bush Brass Clutch bell Puch e50

    ∙ Bearing bush.
    ∙ Brass.
    ∙ Replacement part for the clutch bells and gears with bearing bush from the shop.​
    ∙ Picture 2 is a example picture of the bearing bush in a clutch…

    € 2,95
    Order
  • Shim Washer Assortiment set 30 Pieces Puch e50
    Shim Washer Assortiment set 30 Pieces Puch e50

    Shim Washer Assortiment set 30 Pieces Puch e50

    ∙ Shim washer assortiment set.
    ∙ Set for adjusting the clutch bell of Puch e50 engines and for the kickstart axle.
    ∙ 30 Pieces.

    Complete set with:

    ∙ 2x Shim washer…

    € 16,95
    Order
  • Circlip Front sprocket 15mm Puch
    Circlip Front sprocket 15mm Puch

    Circlip Front sprocket 15mm Puch

    ∙ Circlip frontsprocket.
    ∙ Placed on the Front & Rearside of the front sprocket.
    ∙ A Piece.

    Measurements:​

    ∙ Outer diameter: 15.2mm.
    ∙ Inner diameter: 14.7mm.
    ∙ Thickness:…

    € 0,35
    Order
© 2018 - 2024 VDMPuchParts | sitemap | rss