VDMRacing KTM SX50 Clutch bell Straight Cut Gears with Needlebearing Top-Qaulity! Puch e50
SKU: VDM-VRV0012VDMRacing KTM SX50 Clutch bell Straight Cut Gears with Needlebearing Top-Qaulity! Puch e50
- Clutch bell.
- Clutch bell for KTM SX50 clutch.
- Model with Needlebearing.
- The gear is hardened.
- Suitable for the VDMRacing Straight Cut Gears from our shop.
- Straight Cut Gears.
- Top-Qaulity!
- VDMRacing!
Benefits of straight cut gears:
- Less wear (Bearings / Shim washers)
- Less resistance (More power)
- Better transfer ratio.
- Less chance of defects.
- Stronger.
Information:
- The gear is hardened (Minimal wear)
- The gear is pressed into the clutch bell and blocked with a pin.
- With needlebearing for higher rpms.
Suitable for:
- Puch Maxi e50 Push-start / Pedal-start and kickstart engines.
