Spacer Front side DIY Swingarm VDMRacing! Puch Maxi S
SKU: VDM-RA0003Spacer Front side DIY Swingarm VDMRacing! Puch Maxi S
- Spacer bushing Swingarm.
- DIY, this part can be used to make your own swingarm.
- Placed at the front of the tube profiles of the swingarm.
- Bare metal.
- A Piece (2 required for a swingarm)
- VDMRacing!
Measurements:
- Outer diameter: 40mm.
- Inner diameter: 10mm.
- Width: 20mm.
Suitable for:
- Puch Maxi S.
