Are you looking for a clutch, clutch bell or other supplies for your Puch? 
Here you will find our wide range of clutches, clutch bells and clutch parts for all Puch models such as Puch Maxi, Monza, Magnum X, Magnum, MV, VS, MS, DS. Choose from a standard or Race clutch, clutch bells, pressure plates, sprockets, etc. Suitable for your Street, Race and Cross Puch. You will also find all necessities such as clutch parts, bearings, the needed tools and much more!
Have you not found your part or do you have questions about a part? Contact us for a quick response!
VDMRacing Gear Clutch bell 19 Teeth Puch e50VDMRacing Gear Clutch bell 19 Teeth Puch e50
∙ Gear clutch bell.
∙ Gear to press or weld in a clutch bell.
∙ Ideal as a replacement part or to use for a project!
∙ To be used with a 96 Teeth main gear ( Lookrelated…€ 34,95
VDMRacing Gear Clutch bell 21 Teeth Puch e50VDMRacing Gear Clutch bell 21 Teeth Puch e50
∙ Gear clutch bell.
∙ Gear to press or weld in a clutch bell.
∙ Ideal as a replacement part or to use for a project!
∙ To be used with a 106 Teeth main gear ( Lookrelated…€ 34,95
Locking Plate Clutch M8 Puch 2 / 3 GearLocking Plate Clutch M8 Puch 2 / 3 Gear
∙ Locking plate.
∙ For the M8x1 nut on the crankshaft to fix the clutch.
∙ Suitable for the older Puch 2 and 3 gear engines.
∙ Diameter: 19.5mm.
Suitable for:
∙ Puch MS50.
∙…€ 2,50OFFER!
Reinforcement Plate 3-Segments Clutch Puch e50Reinforcement Plate 3-Segments Clutch Puch e50
∙ Reinforcement plate / Ring clutch.
∙ Reinforcement plate to prevent bending or breaking of the clutch axles of a 3 segments Puch e50 clutch.
∙ 3 Mounting bolts…€ 11,00 € 9,90
Spring set Clutch Blue / Yellow / Red Puch e50Spring set Clutch Blue / Yellow / Red Puch e50
∙ Spring set clutch.
3 Strengths:
∙ Blue: For standart or slightly tuned Puch e50 engines (50cc)
∙ 3.85Kg/mm 1000/1500 rpm.
∙ Yellow: For tuned Puch e50 engines…€ 17,95
Spring set Clutch Red Puch e50Spring set Clutch Red Puch e50
∙ Spring set.
∙ Red model.
∙ For heavy tuned Puch e50 engines (70cc / 70cc+)
∙ 14.4Kg/mm 4500 / 6500 rpm.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start and kickstart engines.€ 3,95
Spring set Clutch Yellow Puch e50Spring set Clutch Yellow Puch e50
∙ Spring set.
∙ Yellow model.
∙ For tuned Puch e50 engines (70cc)
∙ 9.0Kg/mm 2500 / 3500 rpm.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start and kickstart engines.€ 5,95
Spring set Clutch Blue Puch e50Spring set Clutch Blue Puch e50
∙ Spring set.
∙ Blue model.
∙ For standard and light tuned Puch e50 engines (50cc)
∙ 3.85Kg/mm 1000 / 1500 rpm.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start and kickstart engines.€ 3,95
Spring set Clutch Standard Puch e50Spring set Clutch Standard Puch e50
∙ Spring set.
∙ Standard model.
∙ For standard Puch e50 engines (50cc)
∙ 3.0Kg/mm.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start and kickstart engines.€ 3,95
Spring set Clutch Malossi Puch ZA50Spring set Clutch Malossi Puch ZA50
∙ Spring set clutch.
∙ 3 Strengths.
∙ Length: 20mm.
∙ Malossi.
Suitable for:
∙ Puch ZA50 engines.€ 24,95
Clutch bell with Primary drive gear Puch 2 / 3 GearClutch bell with Primary drive gear Puch 2 / 3 Gear
∙ Clutch bell with primary drive gear.
∙ Clutch bell: 16 Teeth.
∙ Primary drive gear: 58 Teeth.
∙ NOS (With some rust marks)
∙ For Puch 2 and 3 gear engines (From…€ 27,95
Cover plate Axle Clutch Tomos 2L / 3L / Puch MV / VS / MS / EtcCover plate Axle Clutch Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Coverplate clutch axle.
∙ Plastic.
Suitable for:
2 & 3 Gear Engines.
∙ Puch VS50.
∙ Puch MS50V.
∙ Puch DS50.
∙ Puch MV50.
∙ Puch X50 (2 & 3 Gear…€ 4,95
Clutch Lever New Model Tomos 2L / 3L / Puch MV / VS / MS / EtcClutch Lever New Model Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Lever clutch.
∙ New model.
∙ Aluminium.
Suitable for:
Puch 2, 3 & 4 Gear Engines.
∙ Puch Z50 2-Speed.
∙ Puch MV50.
∙ Puch MS50(L).
∙ Puch…€ 9,95
Clutch Lever Old Model Tomos 2L / 3L / Puch MV / VS / MS / EtcClutch Lever Old Model Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Lever clutch.
∙ Old model.
∙ Steel.
Suitable for:
Puch 2, 3 & 4 Gear Engines.
∙ Puch Z50 2-Speed.
∙ Puch MV50.
∙ Puch MS50(L).
∙ Puch MS50V.
∙…€ 9,95
Centrering Bolt Tomos 2L / 3L / Puch MV / VS / MS / EtcCentrering Bolt Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Centreringbolt.
∙ Metal.
∙ For the Tension bearing.
Suitable for:
Puch 2, 3 & 4 Gear Engines.
∙ Puch MV50.
∙ Puch MS50L.
∙ Puch MS50V.
∙ Puch M50.
∙…€ 8,95
Torsion spring Axle clutch Small Old Model Tomos 2L / 3L / Puch MV / VS / MS / EtcTorsion spring Axle clutch Small Old Model Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Torsionspring clutch axle.
∙ Small model.
∙ Old model.
∙ Diameter: 10.8mm.
Suitable for:
∙ Puch MS50 (L).
∙ Puch MS50V (From…€ 2,50
Torsion spring Axle clutch Big New Model Puch MV / VS / MS / EtcTorsion spring Axle clutch Big New Model Puch MV / VS / MS / Etc
∙ Torsionspring clutch axle.
∙ Big model.
∙ New model.
∙ Diameter: 15mm.
Suitable for:
∙ Puch MS50V (From 1969)
∙ Puch VS50 (From 1969)
∙ Puch DS50…€ 2,95
Centrering Bolt Puch Z-50 2-SpeedCentrering Bolt Puch Z-50 2-Speed
∙ Centreringbolt.
∙ Plastic.
Suitable for:
∙ Puch Z50 2-Speed.€ 2,95
Torsion spring Axle clutch Puch Maxi e50Torsion spring Axle clutch Puch Maxi e50
∙ Torsionspring clutch axle.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start Engines.
Original Puch article number
350.3.12.022.1€ 5,50
Clutch Lever Puch Maxi e50Clutch Lever Puch Maxi e50
∙ Lever clutch.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start Engines.€ 6,50
Rubber ring Axle clutch Puch Maxi e50Rubber ring Axle clutch Puch Maxi e50
∙ Rubberring clutch lever / clutch axle.
∙ Placed below the clutchlever on the clutch axle.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start Engines.€ 2,95
O-Ring Axle clutch Puch Maxi e50O-Ring Axle clutch Puch Maxi e50
∙ O-Ring clutch axle.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start Engines.
Original Puch article number
350.3.12.022.1€ 0,75
Circlip Axle clutch Puch Maxi e50Circlip Axle clutch Puch Maxi e50
∙ Circlip clutch lever / clutch axle.
∙ For securing the clutch lever on the clutch axle.
Suitable for:
∙ Puch Maxi e50 Push-start / Pedal-start Engines.€ 0,25OFFER!
Seal Clutch cover Kickstart 16mm x 25mm x 7mm Puch Maxi e50Seal Clutch cover Kickstart 16mm x 25mm x 7mm Puch Maxi e50
∙ Seal Kickstart clutchcover.
Measurements:
∙ 16mm x 25mm x 7mm.
Suitable for:
∙ Puch Maxi e50 Kickstart Engines.€ 3,50
Bolt set Clutch cover Kickstart Allen 5-Pieces Puch Maxi e50Bolt set Clutch cover Kickstart Allen 5-Pieces Puch Maxi e50
∙ Mounting bolt set Kickstart clutchcover.
∙ M6 Allen model.
∙ 5 Pieces.
Suitable for:
∙ Puch Maxi e50 Kickstart Engines.€ 0,75
Bolt set Clutch cover Push-start / Pedal-start Crosshead 4-Pieces Puch Maxi e50Bolt set Clutch cover Push-start / Pedal-start Crosshead 4-Pieces Puch Maxi e50
∙ Mounting bolt set Push-start / Pedal-start clutchcover.
∙ M6 Crosshead model.
∙ 4 Pieces.
Suitable for:
∙ Puch Maxi e50 Push-start /…€ 0,75
Axle Clutch lever 75mm Puch 2 / 3 / Old Model 4 GearsAxle Clutch lever 75mm Puch 2 / 3 / Old Model 4 Gears
∙ Clutchlever axle.
∙ Length: 75mm.
Suitable for:
2 & 3 Gear Models / Old Model 4 Gear Models.
∙ Puch 2, 3 & 4 Gear Models.
∙ Tomos 2, 3 & 4 Gear Models.
∙ Puch M50 Racing.€ 15,95- Axle Clutch lever 85mm New Model 4 Gears Puch Monza / Grand Prix / D50 / M50 Racing
Axle Clutch lever 85mm New Model 4 Gears Puch Monza / Grand Prix / D50 / M50 Racing
∙ Clutchlever axle.
∙ Length: 85mm.
Suitable for:
New Model 4 Gear Models.
∙ Puch Monza.
∙ Puch GrandPrix.
∙ Puch DS50.
∙ Puch M50 Racing.€ 18,95 
Circlip Clutch Axle Topside Tomos / Puch 2 / 3 GearsCirclip Clutch Axle Topside Tomos / Puch 2 / 3 Gears
∙ Circlip for Clutch axle.
∙ Top side.
∙ 6mm.
∙ To use for clutch axle 75mm and 85mm (look at matching articles below this article)
Suitable for:
2 & 3 Gear…€ 0,45
Circlip Clutch Axle Bottomside Tomos / Puch 2 / 3 GearsCirclip Clutch Axle Bottomside Tomos / Puch 2 / 3 Gears
∙ Circlip for Clutch axle.
∙ Bottom side.
∙ To use for clutch axle 75mm and 85mm (look at matching articles below this article)
Suitable for:
2 & 3 Gear…€ 0,45
Axle Clutch lever Hardened Push-start / Pedal-start Puch Maxi e50Axle Clutch lever Hardened Push-start / Pedal-start Puch Maxi e50
∙ Clutchlever axle.
∙ Hardened.
Measurements:
∙ Length: 79.2mm.
∙ Diameter: 13.95mm.
Suitable for:
∙ For Puch Maxi e50 Push-start / Pedal-start…€ 29,95
Washer Clutch 26mm - 15mm - 1mm Tomos 2L / 3L / Puch 2 / 3 / 4 GearsWasher Clutch 26mm - 15mm - 1mm Tomos 2L / 3L / Puch 2 / 3 / 4 Gears
∙ Washer clutch.
∙ Placed between the Clutch hub and the Clutchbell.
Measurements:
∙ Outer diameter: 26mm.
∙ Inner diameter: 15mm.
∙ Thickness:…€ 3,50
Washer Clutch bell 21mm - 15mm - 1.7mm Tomos 2L / 3L / Puch 2 / 3 / 4 GearsWasher Clutch bell 21mm - 15mm - 1.7mm Tomos 2L / 3L / Puch 2 / 3 / 4 Gears
∙ Washer clutchbell
∙ Placed behind the Clutchbell.
Measurements:
∙ Outer diameter: 21mm.
∙ Inner diameter: 15mm.
∙ Thickness:…€ 3,25
Cover plate Axle Clutch Galvanized Tomos 2L / 3L / Puch MV / VS / MS / EtcCover plate Axle Clutch Galvanized Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Coverplate clutch axle.
∙ Metal, Galvanized.
Suitable for:
2 & 3 Gear Engines.
∙ Puch VS50.
∙ Puch MS50V.
∙ Puch DS50.
∙ Puch MV50.
∙…€ 3,50
Lock washer Clutch / Flywheel M10 Tomos 2L / 3L / Puch MV / VS / MS / EtcLock washer Clutch / Flywheel M10 Tomos 2L / 3L / Puch MV / VS / MS / Etc
∙ Lockwasher clutch.
∙ M10.
∙ To use for securing of the clutch nut and the flywheel nut.
Suitable for:
∙ Puch MV50
∙ Puch MS50V (Models from…€ 0,75
Clutch bell 18 Teeth High Model 3 Plates Clutch PuchClutch bell 18 Teeth High Model 3 Plates Clutch Puch
∙ Clutchbell.
∙ 18 Teeth
∙ High model for 3 plates clutch.
Suitable for:
∙ Puch Models.€ 74,95
Clutch bell 18 Teeth Low Model 2 Plates Clutch PuchClutch bell 18 Teeth Low Model 2 Plates Clutch Puch
∙ Clutchbell.
∙ 18 Teeth.
∙ Low model for 2 plates clutch.
Suitable for:
∙ Puch Models.€ 69,95
Clutch bell 19 Teeth 4 Gear Model Puch MV50X / MC50 / DS50L / M50 RacingClutch bell 19 Teeth 4 Gear Model Puch MV50X / MC50 / DS50L / M50 Racing
∙ Clutchbell.
∙ 19 Teeth.
∙ High model for 3 plates clutch.
Suitable for:
4 Gear Models.
∙ Puch MV50X.
∙ Puch MC50.
∙ Puch DS50L.
∙ Puch…€ 79,95
Clutch bell Tomos Original! 4L / APN-4 / AT50 / ATX50 / NTX50Clutch bell Tomos Original! 4L / APN-4 / AT50 / ATX50 / NTX50
∙ Clutchbell.
∙ Original Tomos part!
Suitable for:
∙ Tomos 4L.
∙ Tomos 4E.
∙ Tomos APN-4
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
Original Tomos…€ 32,95
Centering cap Clutch Plastic Puch Z50 / 2 / 3 / 4 GearsCentering cap Clutch Plastic Puch Z50 / 2 / 3 / 4 Gears
∙ Centeringcap.
∙ Plastic.
∙ Model with rough screw thread.
Suitable for:
Latest Models Puch 2 and 3 Gear Engines.
∙ Puch MV50 (Latest models)
∙ Puch DS50…€ 4,50
Clutch lever Right - Top side Tomos 4L / APN-4 / AT50 / ATX50 / NTX50Clutch lever Right - Top side Tomos 4L / APN-4 / AT50 / ATX50 / NTX50
∙ Clutchlever.
∙ Rightside - Topside.
Suitable for:
∙ Tomos 4L.
∙ Tomos APN-4
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
Original Tomos…€ 8,95
Clutch lever Right - Bottom side Tomos 4L / APN-4 / AT50 / ATX50 / NTX50Clutch lever Right - Bottom side Tomos 4L / APN-4 / AT50 / ATX50 / NTX50
∙ Clutchlever.
∙ Rightside - Bottomside.
Suitable for:
∙ Tomos 4L.
∙ Tomos APN-4
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
Original Tomos…€ 8,95
Bolt Reinforcement plate Clutch M4 x 16mm Allen Puch e50Bolt Reinforcement plate Clutch M4 x 16mm Allen Puch e50
∙ Bolt reinforcementplate clutch.
∙ Bolt for mounting the reinforcement plate on the clutch.
∙ M4 x 16mm.
∙ Allen.
∙ Galvanized.
∙ A Piece.
Suitable for:
∙…€ 0,19
Locking pin Clutch 2mm x 12mm Tomos 4L / APN-4 / AT50 / ATX50 / NTX50Locking pin Clutch 2mm x 12mm Tomos 4L / APN-4 / AT50 / ATX50 / NTX50
∙ Lockingpin.
Measurements:
∙ Length: 12mm.
∙ Thickness: 2mm.
Suitable for:
∙ Tomos 4L.
∙ Tomos APN-4
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos…€ 0,50
Retaining ring Clutch Tomos 4L / APN-4 / AT50 / ATX50 / NTX50Retaining ring Clutch Tomos 4L / APN-4 / AT50 / ATX50 / NTX50
∙ Retainingring / Locking plate.
∙ To use for securing the left nut on the clutch.
Suitable for:
∙ Tomos 4L.
∙ Tomos APN-4
∙ Tomos AT50.
∙ Tomos…€ 2,95
Locking pin Clutch Tomos 4L / APN-4 / AT50 / ATX50 / NTX50Locking pin Clutch Tomos 4L / APN-4 / AT50 / ATX50 / NTX50
∙ Lockingpin.
∙ This part is located in the pulling shaft / falls into the spring shell.
Suitable for:
∙ Tomos 4L.
∙ Tomos APN-4
∙ Tomos AT50.
∙ Tomos…€ 4,50
Nut Clutch M14 x 1mm SW 22 Left Tomos 4L / APN-4 / AT50 / ATX50 / NTX50Nut Clutch M14 x 1mm SW 22 Left Tomos 4L / APN-4 / AT50 / ATX50 / NTX50
∙ Clutch nut.
∙ Left screw thread.
Measurements:
∙ Screw thread: M14 x 1mm.
∙ Wrench size: 22mm.
Suitable for:
∙ Tomos 4L.
∙ Tomos APN-4
∙…€ 3,95
Nut Clutch M8 x 1mm Left Old Model Tomos 4L / SprintNut Clutch M8 x 1mm Left Old Model Tomos 4L / Sprint
∙ Clutch nut.
∙ Left screw thread.
Measurements:
∙ Screw thread: M8 x 1mm.
Suitable for:
∙ Tomos 4L (Old Models)
∙ Tomos Sprint (Old Models)
Original Tomos…€ 4,50
Needle Bearing Clutch 12mm x 15mm x 13mm Tomos 4L / APN-4 / AT50 / ATX50 / NTX50Needle Bearing Clutch 12mm x 15mm x 13mm Tomos 4L / APN-4 / AT50 / ATX50 / NTX50
∙ Needlebearing.
∙ Placed in the clutch center / right side crankshaft.
Measurements:
∙ 12mm x 15mm x 13mm.
Suitable for:
∙ Tomos…€ 11,95
Tension Bearing set 3-Pieces Tomos 4L / APN-4 / AT50 / ATX50 / NTX50Tension Bearing set 3-Pieces Tomos 4L / APN-4 / AT50 / ATX50 / NTX50
∙ Pull bearing / Tension bearing.
∙ 3 Pieces.
Suitable for:
∙ Tomos 4L.
∙ Tomos APN-4
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
Original…€ 14,95
Spring Clutch Tomos 4L / APN-4 / AT50 / ATX50 / NTX50Spring Clutch Tomos 4L / APN-4 / AT50 / ATX50 / NTX50
∙ Clutchspring.
∙ A Piece ( 4/6 Pieces needed)
Suitable for:
∙ Tomos 4L.
∙ Tomos APN-4
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
Original Tomos article number
207.409€ 2,95
Spring shell Clutch Tomos 4L / APN-4 / AT50 / ATX50 / NTX50Spring shell Clutch Tomos 4L / APN-4 / AT50 / ATX50 / NTX50
∙ Spring shell / Pull plate clutch.
Suitable for:
∙ Tomos 4L.
∙ Tomos APN-4
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.
Original Tomos article number
207.410€ 6,95
Grommet Clutch 1 Hole Tomos 4L / 4E / AT50 / ATX50 / NTX50Grommet Clutch 1 Hole Tomos 4L / 4E / AT50 / ATX50 / NTX50
∙ Clutchgrommet.
∙ Model with 1 hole.
∙ A Piece.
Suitable for:
∙ Tomos 4L.
∙ Tomos 4E.
∙ Tomos AT50.
∙ Tomos ATX50.
∙ Tomos NTX50.€ 3,95
Puller Clutch / inner rotor BuzzettiPuller Clutch / inner rotor Buzzetti
∙ Clutch puller / inner rotor puller.
∙ To remove the clutch from a Puch e50 engine.
∙ Also to use for removing the inner rotor from a HPI or PVL ignition.
∙ Buzzetti.€ 19,95
Puller Clutch / Inner rotor Puch e50Puller Clutch / Inner rotor Puch e50
∙ Puller Clutch / Inner rotor ignition.
∙ For disassembling the clutch of Puch e50 engines.
∙ Can also be used for disassembling an HPI and PVL flywheel rotor.
Suitable for:
∙ Puch…€ 9,95
