VDMRacing Push-start / Pedal-start Clutch bell Straight Cut Gears with Needlebearing Top-Qaulity! Puch e50

∙ Clutch bell.
∙ Push-start / Pedal-start model.
∙ Model with Needlebearing.
∙ The gear is hardened.
∙ Suitable…

VDMRacing Kickstart Clutch bell Straight Cut Gears with Needlebearing Top-Qaulity! Puch e50

∙ Clutch bell.
∙ Kickstart model.
∙ Model with Needlebearing.
∙ The gear is hardened.
∙ Suitable for the VDMRacing Straight Cut…

VDMRacing KTM SX50 Clutch bell Straight Cut Gears with Needlebearing Top-Qaulity! Puch e50

∙ Clutch bell.
∙ Clutch bell for KTM SX50 clutch.
∙ Model with Needlebearing.
∙ The gear is hardened.
∙ Suitable for the…

VDMRacing Push-start / Pedal-start Clutch bell Straight Cut Gears Top-Qaulity! Puch e50

∙ Clutch bell.
∙ Push-start / Pedal-start model.
∙ The gear is hardened.
∙ Suitable for the VDMRacing Straight Cut Gears from our…

VDMRacing Kickstart Clutch bell Straight Cut Gears Top-Qaulity! Puch e50

∙ Clutch bell.
∙ Kickstart model.
∙ The gear is hardened.
∙ Suitable for the VDMRacing Straight Cut Gears from our shop.
∙ Straight Cut Gears.
∙…

VDMRacing KTM SX50 Clutch bell Straight Cut Gears Top-Qaulity! Puch e50

∙ Clutch bell.
∙ Clutch bell for KTM SX50 clutch.
∙ The gear is hardened.
∙ Suitable for the VDMRacing Straight Cut Gears from our shop.
∙ Straight…

Clutch bell Push-start / Pedal-start 21 Teeth as Original Puch e50

∙ Clutch bell.
∙ Push-start / Pedal-start model.
∙ Stronger as a original clutch bell.
∙ With Brass bearing bush.
∙ 21 Teeth.

Suitable for:

∙ Puch…

Clutch bell Kickstart engine 21 Teeth as Original Puch e50

∙ Clutch bell.
∙ Kickstart model.
∙ Stronger as a original clutch bell.
∙ With Brass bearing bush.
∙ 21 Teeth.

Suitable for:

∙ Puch Maxi e50 kickstart…

Clutch bell Push-start / Pedal-start 19 Teeth / 21 Teeth Top-Quality! VDMRacing Puch e50

∙ Clutch bell.
∙ Push-start / Pedal-start model.
∙ Stronger and Lighter as a original clutch bell.
∙ Choice out of 19 and 21…

Clutch bell Kickstart 19 Teeth / 21 Teeth Top-Quality! VDMRacing Puch e50

∙ Clutch bell.
∙ Kickstart model.
∙ Stronger and Lighter as a original clutch bell.
∙ Choice out of 19 and 21 Teeth.
∙ Top-Quality!
∙…

Clutch bell KTM SX50 19 Teeth / 21 Teeth Top-Quality! VDMRacing Puch e50

∙ Clutch bell.
∙ Clutch bell for KTM SX50 clutch.
∙ Stronger and Lighter as a original clutch bell.
∙ Choice out of 19 and 21 Teeth.
∙…

Pressure Plate set Clutch Kickstart Complete Puch e50

∙ Pressure plate set.
∙ Complete set that is mounted on the clutch of a Puch e50 kickstart engine.

Complete set met:

∙ Pressure plate.
∙ Sprocket.
∙ Spring…

Pressure Plate Clutch Kickstart Puch e50

∙ Pressure plate.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Identical to Puch article number

349.1.12.305.1

Sprocket Clutch Kickstart Puch e50

∙ Sprocket.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Nut + Spring washer Clutch Kickstart M10 Puch e50

∙ Nut + Spring washer.
∙ Mounting set to mount the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Nut Clutch Kickstart M10 Puch e50

∙ Nut.
∙ Nut to mount the clutch of a Puch e50 kickstart engine.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Spring washer Clutch Kickstart M10 Puch e50

∙ Spring washer.
∙ Spring washer to mount the clutch of a Puch e50 kickstart engine.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Pressplate Clutch bell Push-start / Pedal-start Original Surflex Complete Puch e50

∙ Clutch bowl / Pressure plate.
∙ Complete with pin.
∙ This part is placed in the clutch bell and is secured with a circlip.
∙ Original…

Pressplate Clutch bell Push-start / Pedal-start as Original Complete Puch e50

∙ Clutch bowl / Pressure plate.
∙ Model as original.
∙ Complete with pin.
∙ This part is placed in the clutch bell and is secured with a…

Pressplate Clutch bell Push-start / Pedal-start Race Complete Puch e50

∙ Clutch bowl / Pressure plate.
∙ Race model (Lighter as original model)
∙ Weight: 107.9 Gram.
∙ Complete with pin.
∙ This part is placed in the…

Pressplate Clutch bell Push-start / Pedal-start as Original Puch e50

∙ Clutch bowl / Pressure plate.
∙ Model as original.
∙ Bare model.
∙ This part is placed in the clutch bell and is secured with a circlip.

Suitable…

Circlip pressplate Clutch bell Push-start / Pedal-start Surflex Puch e50

∙ Circlip.
∙ This part secures the pressure plate / clutch bowl in the clutch bell of a Puch e50 Push-start / Pedal-start engine.
∙ Orginal Puch!
∙…

Pin Pressplate with Bearing Clutch Push-start / Pedal-start Puch e50

∙ Stift.
∙ Complete with bearing.
∙ This part is placed in the pressure plate / clutch bowl of a Puch e50 Push-start / Pedal-start engine.

Suitable…

Axial Bearing pin pressplate Clutch Push-start / Pedal-start Puch e50

∙ Axial bearing.
∙ This part is placed in the pressure stift of a Puch Maxi e50 Push-start / Pedal-start engine.

Suitable for:

∙ Puch Maxi e50…

Circlip pin Pressplate Clutch Push-start / Pedal-start Puch e50

∙ Circlip.
∙ This part secures the pin on the pressure plate / clutch bowl of a Puch e50 Push-start / Pedal-start engine.
∙ A Piece.

Measurements:

∙ Outer…

Nut + Spring Washer Clutch Push-start / Pedal-start M10 Puch e50

∙ Nut + Spring washer.
∙ Mounting set to mount the clutch of a Puch e50 push-start / pedal-start engine.

Suitable for:

∙ Puch Maxi e50 push-start /…

Nut Clutch Push-start / Pedal-start Engine M10 Puch e50

∙ Nut.
∙ Nut to mount the clutch of a Puch e50 Push-start / Pedal-start engine.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start engines.

Spring Washer Clutch Push-start / Pedal-start Engine M10 Puch e50

∙ Spring washer.
∙ Spring washer to mount the clutch of a Puch e50 Push-start / Pedal-start engine.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Push-start /…

Mounting set Clutch bell / Clutch Push-start / Pedal-start 11-Pieces Puch e50

∙ Mounting set clutch bell / clutch.
∙ This set contains all the parts to mount the clutch bell / clutch in a Puch e50 Push-start / Pedal-start…

Shim Washer Assortiment set 30 Pieces Puch e50

∙ Shim washer assortiment set.
∙ Set for adjusting the clutch bell of Puch e50 engines and for the kickstart axle.
∙ 30 Pieces.

Complete set with:

∙ 2x Shim washer…

Cirlip Front side Clutch bell Puch e50

∙ Circlip.
∙ Front side (Clutch side)
∙ This part secures the clutch bell on the crankshaft of a Puch e50 Push-start / Pedal-start and Kickstart engines.
∙ A…

Cirlip Rear side Clutch bell Puch e50

∙ Circlip.
∙ Rearside (Behind clutch bell)
∙ This part secures the clutch bell on the crankshaft of a Puch e50 Push-start / Pedal-start and Kickstart engines.
∙ A…

Shim Washer Clutch bell Front side Puch e50

∙ Shim washer.
∙ Front side (Clutch side)
∙ Set for adjusting the clutch bell of Puch e50 engines and for the kickstart axle.
∙ A Piece.

Measurements:

∙ Outer diameter:…

Shim Washer Clutch bell Rear side Puch e50

∙ Shim washer.
∙ Rear side (Behind clutch bell)
∙ Set for adjusting the clutch bell of Puch e50 engines and for the kickstart axle.
∙ A Piece.

Measurements:

∙ Outer diameter:…

VDMRacing Needlebearing Clutch bell Puch e50

∙ Needle bearing.
∙ Replacement part for the VDMRacing clutch bell and gears with needlebearing from our shop.
∙ Picture 2 is a example picture of the needlebearing in a…

Bearing Bush Brass Clutch bell Puch e50

∙ Bearing bush.
∙ Brass.
∙ Replacement part for the clutch bells and gears with bearing bush from the shop.​
∙ Picture 2 is a example picture of the bearing bush in a clutch…

Bearing Bush Clutch bell Tomos 2L / 3L Puch MV / VS / MS / Z50 / Etc

∙ Bearing bush.
∙ ​Replacement part for the clutch bell bearing bush of a Puch 2, 3 and 4 gear engine.
∙ Precisely fitting!

Measurements:

∙ Total…

Clutch Race KTM SX50 Model VDMRacing Top-Quality! Puch e50

∙ Clutch.
∙ Best clutch on the market!
∙ Suitable for Race, Cross and Street use!
∙ Plug & Play with the VDMRacing KTM SX50 Clutch bell of the shop in Puch e50…

Clutch Kickstart Adige Race Puch Maxi e50

∙ Clutch.
∙ Model with internal spring.
∙ Adige Race.

* It is recommended to soak the clutch in ATF oil for 24 hours before assembly.

* Can only be disassembled with the special…

Clutch 3-Segments Race! Push-start / Pedal-start Puch e50

∙ Clutch.
∙ Super plug & play clutch for beter performance.
∙ Suitable for street, cross and race use!
∙ With 2x Clutch spring sets 50N/mm & 100N/mm.
∙…

Clutch 3-Segments Race! Kickstart Puch e50

∙ Clutch.
∙ Super plug & play clutch for beter performance.
∙ Suitable for street, cross and race use!
∙ With 2x Clutch spring sets 50N/mm & 100N/mm.
∙ Reinforced with a…

Clutch Strengthened - Race Push-start / Pedal-start VDMRacing Puch e50

∙ Clutch.
∙ Race / Sport model.
∙ 3 Segments.
∙ Reinforced with a reinforcement ring!
∙ Lightened segments!
∙ Original Qaulity!
∙ Plug &…

Clutch Strengthened - Race Kickstart VDMRacing Puch e50

∙ Clutch.
∙ Race / Sport model.
∙ 3 Segments.
∙ Reinforced with a reinforcement ring!
∙ Lightened segments!
∙ Original Qaulity!
∙ Plug & Play!
∙ With 3…

Clutch DMP Streetpro Race Push- / Pedal-start Puch Maxi e50

∙ Clutch.
∙ Race / Sport model.
∙ 3 Segments.
∙ Reinforced with a reinforcement ring!
∙ Plug & Play!
∙ With 3 strenghts springs: Blue, Yellow and Red.

3…

Clutch Push-start / Pedal-start 3-Segments Puch Maxi e50

∙ Clutch.
∙ 3-Segments model.
∙ With stiffer springs than the original clutch!
∙ Good replacement clutch for the original.

* It is recommended to soak the clutch…

Clutch Kickstart 3-Segments Puch Maxi e50

∙ Kickstart clutch.
∙ 3-Segments model.
∙ With stiffer springs than the original clutch!
∙ Good replacement clutch for the original.

* It is recommended to soak the clutch in ATF…

Clutch Conversion set 3-Segments Kevlar Race! Puch e50

∙ Clutch conversion set.
∙ Super replacement set for your original clutch for beter performance.
∙ Suitable for street, cross and race use!
∙ Kevlar lining!
∙ 3…

Clutch Second Gear Puch ZA50

∙ Clutch.
∙ Second Gear model.

Suitable for:

∙ Puch ZA50 Engines.

Clutch Automatic Puch X30A Velux / MS50A / MV50A / VS50A / R50A

∙ Clutch.
∙ Automatic engine model.

Measurements:

∙ Outer diameter: 83.6mm.
∙ Inner diameter: 11.6mm.

Suitable for:

∙ Puch X30A (Velux)
∙ Puch…

Hub Clutch KTM SX50 Model VDMRacing Top-Quality! Puch e50

∙ Clutch hub.
∙ KTM SX50 Model.
∙ The kickstart sprocket of a puch e50 engine fits in the clutch hub.
∙ To use with original and replica KTM SX50 Segments!
∙…

Disc spring set Clutch KTM SX50

∙ Disc spring set clutch.
∙ To mount in a KTM SX50 Clutch for better adjustment.

Complete set with:

∙ 3 Bolts.
∙ 3 Bushes.
∙ 42 Disc springs.
∙ 6x0.3mm Shim washers.
∙ 6x0.5mm Shim…

Spring set Clutch KTM SX50

∙ Spring set clutch.
∙ To mount in a KTM SX50 Clutch.

Complete set with:

∙ 3 Bolts.
∙ 3 Bushes.
∙ 3 Springs.
∙ 6 Shim washers.

Suitable for:

∙ KTM Clutch.

Segment set Clutch KTM SX50 Model 3-Pieces VDMRacing Top-Quality!

∙ Segment set.
∙ To use in combination with a VDMRacing KTM SX50 clutch hub, and also in combination with a Original KTM SX50 clutch.
∙ 3 Pieces.
∙…

Segment Clutch KTM SX50 Model VDMRacing Top-Quality!

∙ Segment.
∙ To use in combination with a VDMRacing KTM SX50 clutch hub, and also in combination with a Original KTM SX50 clutch.
∙ A Piece.
∙ Top-Quality!
∙…

Segment set Clutch 3-Segments as Original Puch e50

∙ Clutchsegment set.
∙ Model as Original.
∙ 3 Claw (Segments)

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start and Kickstart engines.

Segment set Clutch Adige Race kickstart Puch e50

∙ Segment set.
∙ Suitable for Adige Race clutch.
∙ Adige Race.

Suitable for:

∙ Puch Maxi e50 Kickstart engines.

Clutch set Race Tomos A35 / A55

∙ Race clutch.
∙ F.M Racing.
∙ CNC Aluminum.
∙ For 1st and 2nd gear.
∙ Suitable for 50CC, 65CC, 70CC en 74CC engines.
∙ Plug&Play with the original 1st and 2nd gear clutch hub (Not…

Spring Clutch Adige Race kickstart Puch e50

∙ Clutch spring.
∙ Internal spring.
∙ Total length: 146mm.
∙ Suitable for Adige Race clutch.
∙ Adige Race.

Suitable for:

∙ Puch Maxi e50 kickstart motoren.

Clutchpuller Disassemble Tool Clutch Adige Race kickstart Puch e50

∙ Puller clutch.
∙ To disassemble a Adige Race clutch.
∙ Adige Race.

*First the clutch shoes must be removed, then you can pull the clutch out of the…

Clutch set Reinforced +70% Puch Z50

∙ Clutch set.
∙ Reinforced (+70%)
∙ Swiing.

Suitable for:

∙ Puch Z50 engine.

Clutch plate Puch 6 Gears / M50Jet / Monza 6SL / Cobra 6V / Daytona 6V

∙ Clutchplate.
∙ A Piece.

Suitable for:

∙ Puch M50Jet.
∙ Puch Monza 6SL.
∙ Puch Cobra 6v.
∙ Puch Daytona 6v.

Original Puch article number

337.1.12.124.1

Intermediate Clutch plate Steel 12-Pins Puch 4 Gear / Z50 / Monza / Grandprix

∙ Intermediate clutch plate.
∙ Unclothed.
∙ Steel.
∙ Model with 12 pins.
∙ A Piece.

Suitable for:

4 Gear engines (New models)

∙ Puch…

Intermediate Clutch plate Steel 6-Pins Puch 2 / 3 / (4) Gear

∙ Intermediate clutch plate.
∙ Unclothed.
∙ Steel.
∙ Model with 6 pins.
∙ A Piece.

Suitable for:

2 and 3 Gear engines.

4 Gear engines (Old models)

∙…

Tension Bearing Clutch extra Reinforced! Puch Z50 / 2 / 3 Gears

∙ Tension bearing / pull bearing clutch.
∙ Extra Reinforced version!
∙ For models with 2 clutch plates.
∙ Screw thread: M10x1.
∙ Bearing housing with oil…

Tension Bearing Clutch extra Reinforced! Puch 4 Gear / R-Engine

∙ Tension bearing / pull bearing clutch.
∙ Extra Reinforced version!
∙ Screw thread: M10x1.
∙ Bearing housing with oil holes for extra oil supply!
∙ With…

Tension Bearing Clutch A-Qaulity! A.M.W Puch Z50 / 2 / 3 Gears

∙ Tension bearing / pull bearing clutch
∙ A-Qaulity!
∙ A.M.W.

Suitable for:

2 and 3 Gear engines.

∙ Puch Z50 2-Speed.
∙ Puch Velux.
∙ Puch MS.
∙ Puch…

Tension Bearing Clutch A-Qaulity A.M.W Puch 4 Gear / R-Engine

∙ Tension bearing / pull bearing clutch.
∙ A-Qaulity!
∙ A.M.W.

Suitable for:

4 Gear and R-Engines.

3 Gear engines with 3 clutch plates.

∙ Puch Maxi…

Tension Bearing Clutch Puch Z50 / 2 / 3 Gear

∙ Tension bearing / pull bearing clutch.
∙ For Puch 2 and 3 gear engines.

Suitable for:

∙ Puch Z50.
∙ Puch MS.
∙ Puch VS.
∙ Puch MV.
∙ Puch VS50D.
∙ Puch DS50 (3…

Tension Bearing Clutch Puch 4 Gear

∙ Tension bearing / pull bearing clutch.
∙ B-Qaulity.

Suitable for:

3 Gear engines with 3 clutch plates.

4 Gear engines.

∙ Puch VZ50-4.
∙ Puch DS50R.
∙ Puch DS50-4.
∙ Puch MC50…

Spring Holder Clutch bell Puch 2 / 3 Gear

∙ Spring holder clutch bell.
∙ Only for Puch 2 and 3 gear engines with a 2-plate clutch!

Measurements:

∙ Total height: 26mm.
∙ Height of wide profile: 21.5mm.

Suitable…

Springdisc Pressure plate Clutch Puch 2 / 3 / 4 Gear

∙ Clutch Spring disc / Pressplate.

Measurements:

∙ Outer diameter: 44mm.
∙ Inner diameter axle hole: 10mm.
∙ Height: 15.4mm.

Suitable for:

∙ Puch 2, 3 & 4 Gear…

Circlip Housing / Tension Bearing 45mm Puch / Universal

∙ Housing circlip.
∙ Model: 45mm.
∙ DIN 472.
∙ A Piece.

Measurements:

∙ Outer / Build-in diameter: 45mm.
∙ Thickness: -mm.

Suitable for:

∙ Puch Models…

Spring clutch Red Strengthened +40% Puch Z50 / 2 / 3 / 4 Gears

∙ Spring clutch.
∙ Strengthened (+40%)
∙ This spring is 40% harder than the original spring. The spring is suitable for middle to heavy tuned mopeds!
∙…

Spring clutch Blue Strengthened +20% Puch Z50 / 2 / 3 / 4 Gears

∙ Spring clutch.
∙ Strengthened (+20%)
∙ This spring is 20% harder than the original spring. The spring is suitable for middle to heavy tuned mopeds!
∙…

Clutch Spring Standard Puch Z50 / 2 / 3 / 4 Gears

∙ Spring clutch.
∙ Standard model.

Measurements:

∙ Diameter: 39mm.
∙ Height: 20mm.

Suitable for:

2, 3 & 4 Gear engines.

∙ Puch Z50 engine.
∙ Puch MV50.
∙ Puch…

Shift Dampers White extra Stiff Puch ZA50

∙ Shift Dampers.
∙ White model, extra stiff!
∙ Top-Quality!
∙ These shift dampers are a lot stiffer than the red shift dampers, because of this they are better suited for high…

Shift Dampers Red Puch ZA50

∙ Shift Dampers.
∙ Red model.
∙ Top-Quality, better Quality as original!

Measurements:

∙ Diameter: 19mm.
∙ Thickness: 8mm.

Suitable for:

∙ Puch ZA50 engines.

VDMRacing Gear Clutch bell 19 Teeth Puch e50

∙ Gear clutch bell.
∙ Gear to press or weld in a clutch bell.
∙ Ideal as a replacement part or to use for a project!
∙ To be used with a 96 Teeth main gear ( Lookrelated…

VDMRacing Gear Clutch bell 21 Teeth Puch e50

∙ Gear clutch bell.
∙ Gear to press or weld in a clutch bell.
∙ Ideal as a replacement part or to use for a project!
∙ To be used with a 106 Teeth main gear ( Lookrelated…