Distance Bush Right side 5 Star Alloy Cast Wheel Right side Puch Maxi

∙ Distance bush / spacer.
∙ Placed on the right side of the rear wheel in combination with a 5 Star alloy cast wheel.
∙ A Piece.

Measurements:

∙…

Dust cover Frontwheel Left Spokewheel Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Dustcover.
∙ For the front wheel bearing left.
∙ For Models with Full hub.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Puch…

Spacer Frontwheel Right Spokewheel Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Pressurering / Spacer.
∙ For securing the brake torque plate.

Measurements:

∙ 20mm x 12.5mm x 9mm.

Suitable for:

∙ Puch MV.
∙ Puch MS,
∙…

Nut Hollow axle M14 x 1mm Puch MV / VS / DS / VZ / MC

∙ Nut for hollow axle.
∙ For the front and rear axle.

Measurements:

∙ M14 x 1.00mm.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch VZ.
∙ Puch MC.

Nut Wheel Axle Frontside 14mm M10 x 1mm Tomos 2L / 3L / Puch MV / MS / VS / Etc

∙ Wheelaxle nut / Frontwheelaxle nut.
∙ Front side.
∙ M10 x 1mm.
∙ A Piece.

Measurements:

∙ Diameter: 14mm
∙ Wrench size: 17mm.
∙…

Nut Wheel Axle Frontside 14mm M10 x 1mm Puch VZ50 / MC50

∙ Wheelaxle nut / Frontwheelaxle nut.
∙ Front side.
∙ Extra long model.
∙ A Piece.

Measurements:

∙ Diameter: 14mm
∙ Screw thread: M10 x 1mm.

Suitable…

Nut Wheel Axle M12 x 1mm Wide Galvanized Self retaining Puch Maxi

∙ Wheelaxle nut.
∙ M12 x 1mm.
∙ Galvanized.
∙ Selfretaining model!
∙ For 12mm wheel axle.
∙ Wide model.
∙ A Piece.

Suitable for:

∙ Puch Maxi Models.

Nut Wheel Axle M12 x 1mm Wide Black Puch Maxi

∙ Wheelaxle nut.
∙ Black galvanized.
∙ M12 x 1mm.
∙ For 12mm wheel axle.
∙ Wide model.
∙ A Piece.

Suitable for:

∙ Puch Maxi Models.

Nut Wheel Axle M12 x 1mm Wide Puch Maxi

∙ Wheelaxle nut.
∙ M12 x 1mm.
∙ For 12mm wheel axle.
∙ 10mm Wide.
∙ A Piece.

Suitable for:

∙ Puch Maxi Models.

Nut Wheel Axle M11 x 1mm Wide Puch Maxi

∙ Wheelaxle nut.
∙ M11 x 1mm.
∙ For 12mm wheel axle.
∙ 10mm Wide.
∙ A Piece.

Suitable for:

∙ Puch Maxi Models.

Nut Wheel Axle M15 x 1.25mm Hollow axle Puch M50 Racing

∙ Wheelaxle nut.
∙ M15 x 1.25mm.
∙ Suitable for the hollow shaft of the gear housing of a Puch M50 Racing with Puch wheel hub.
∙ Does not fit on ZKW wheel hub.
∙ A…

Nut Wheel Axle Rear side with Collar & Securing M12 x 1.25mm Honda / Universal

∙ Nut rear wheel axle.
∙ Model with collar & Securing.
∙ Thread: M12 x 1.25mm.
∙ For 12mm wheel axle.
∙ Key width 18mm.

Suitable for:

∙…

Nut Wheel Axle Rear side with Collar M12 x 1.25mm Honda / Universal

∙ Nut rear wheel axle.
∙ Model with collar.
∙ Thread: M12 x 1.25.
∙ For 12mm wheel axle.

Suitable for:

∙ Universal to use on various moped models.

Ascone 12mm Spokewheel Ball bearing Puch Maxi

∙ Ascone nut.
∙ Suitable for spokewheels with separate cups.
∙ A Piece.

Suitable for:

∙ Puch Maxi Models.

Ascone 11mm Spokewheel Ball bearing Puch Maxi

∙ Ascone nut.
∙ Suitable for spokewheels with separate cups.
∙ A Piece.

Suitable for:

∙ Puch Maxi Models.

Dust ring Spokewheels 29.5mm x 21mm x 0.4mm Puch Maxi

∙ Dustring / Dust plate.
∙ For the closure of the cones of the spokewheels frontside & rearside.
∙ A Piece.

Measurements:

∙ Outer diameter: 29.5mm.
∙ Inner…

Cup Spokewheels 29mm Puch Maxi

∙ Cup.
∙ For the closure of the cones of the spokewheels frontside & rearside.
∙ A Piece.

Measurements:

∙ Outer diameter: 29mm.
∙ Inner diameter: 25.85mm.
∙ Diameter hole: 15mm.
∙…

Washer Wheel Axle 12mm Galvanized Puch

∙ Washer wheelaxle.
∙ For 12mm wheel axle.
∙ Steel.
∙ Galvanized.
∙ DIN 125A.
∙ A Piece.

Measurements:

∙ Outer diameter: 24mm.
∙ Inner diameter: 13mm.
∙ Thickness:…

Dust Seal Front Wheel Tomos 4L / ATX50

∙ Dust seal.
∙ Mounted on the left side in the hub of the front wheel.
∙ 2 Pieces, felt ring + galvanized cap.

Suitable for:​

∙ Tomos 4L.
∙ Tomos ATX50.

Wheel Bearing Conversion to Fixed bearings! Frontside / Rearside Puch Maxi

∙ Wheelbearing.
∙ For star rim and spoke wheel hubs with inner diameter of 29mm.
∙ To convert your original hub with loose balls to fixed…

Wheel Bearing Frontside / Rearside 6001 2RS SKF A-Qaulity! Puch Maxi

∙ Wheelbearing.
∙ Suitable for spokewheels & starwheels with fixed bearings.
∙ 6001 2RS SKF, A-Qaulity!
∙ A Piece.

Measurements:

∙ Inner diameter:…

Wheel Bearing Frontside / Rearside 6001 2RS Puch Maxi

∙ Wheelbearing.
∙ Suitable for spokewheels & starwheels with fixed bearings.
∙ 6001 2RS.
∙ A Piece.

Measurements:

∙ Inner diameter: 12mm.
∙ Outer diameter:…

Wheel Bearing 6002 2RSH Koyo A-Qaulity! Tomos 2L / 3L / Puch MV / VS / DS / VZ / MC

∙ Wheelbearing.
∙ 6002 2RSH Koyo A-Qaulity!
∙ A Piece.

Measurements:

∙ Inner diameter: 15mm.
∙ Outer diameter: 32mm.
∙ Width:…

Wheel Bearing 6002 Tomos 2L / 3L / Puch MV / VS / DS / VZ / MC

∙ Wheelbearing.
∙ 6002 Bearing.
∙ A Piece.

Measurements:

∙ Inner diameter: 15mm.
∙ Outer diameter: 32mm.
∙ Width: 9mm.

Suitable for:

∙ Puch MV50…

Distance bush spacer Wheel axle Aluminium 50mm - 12mm Universal

∙ Distance bush spacer wheel axle.
∙ Aluminium.
∙ Suitable for 12mm wheel axle.
∙ To fill out the space on the axle between the wheel hub and the swingarm or…

Distance bush spacer Wheel axle Aluminium 40mm - 12mm Universal

∙ Distance bush spacer wheel axle.
∙ Aluminium.
∙ Suitable for 12mm wheel axle.
∙ To fill out the space on the axle between the wheel hub and the swingarm or…

Distance bush spacer Wheel axle Aluminium 30mm - 12mm Universal

∙ Distance bush spacer wheel axle.
∙ Aluminium.
∙ Suitable for 12mm wheel axle.
∙ To fill out the space on the axle between the wheel hub and the swingarm or…

Distance bush spacer Wheel axle Aluminium 20mm - 12mm Universal

∙ Distance bush spacer wheel axle.
∙ Aluminium.
∙ Suitable for 12mm wheel axle.
∙ To fill out the space on the axle between the wheel hub and the swingarm or…

Distance bush spacer Wheel axle Aluminium 10mm - 12mm Universal

∙ Distance bush spacer wheel axle.
∙ Aluminium.
∙ Suitable for 12mm wheel axle.
∙ To fill out the space on the axle between the wheel hub and the swingarm or…

Distance bush spacer Wheel axle Aluminium 50mm - 11mm Universal

∙ Distance bush spacer wheel axle.
∙ Aluminium.
∙ Suitable for 11mm wheel axle.
∙ To fill out the space on the axle between the wheel hub and the swingarm or…

Distance bush spacer Wheel axle Aluminium 40mm - 11mm Universal

∙ Distance bush spacer wheel axle.
∙ Aluminium.
∙ Suitable for 11mm wheel axle.
∙ To fill out the space on the axle between the wheel hub and the swingarm or…

Distance bush spacer Wheel axle Aluminium 30mm - 11mm Universal

∙ Distance bush spacer wheel axle.
∙ Aluminium.
∙ Suitable for 11mm wheel axle.
∙ To fill out the space on the axle between the wheel hub and the swingarm or…

Distance bush spacer Wheel axle Aluminium 20mm - 11mm Universal

∙ Distance bush spacer wheel axle.
∙ Aluminium.
∙ Suitable for 11mm wheel axle.
∙ To fill out the space on the axle between the wheel hub and the swingarm or…

Distance bush spacer Wheel axle Aluminium 10mm - 11mm Universal

∙ Distance bush spacer wheel axle.
∙ Aluminium.
∙ Suitable for 11mm wheel axle.
∙ To fill out the space on the axle between the wheel hub and the swingarm or…

Bolt set Star wheel Axle Original 5-Pieces Puch Maxi

∙ Boltset Starwheel.
∙ Model as Original (Wide head)
∙ Set for 1 wheel!
∙ Mounting bolts for starwheel front and rear hubs.
∙ 5 Pieces.

Suitable for:

∙ Puch Maxi Star wheels.

Bolt set Star wheel 5-Pieces Puch Maxi

∙ Boltset Starwheel.
∙ Set for 1 wheel!
∙ Mounting bolts for starwheel front and rear hubs.
∙ 5 Pieces.

Suitable for:

∙ Puch Maxi Star wheels.

Replacement cover Wheel Hub for Counter driver Speedometer Puch Maxi

∙ Replacement cover / lid.
∙ Replacement cover in place for the counter driver on the wheel.
∙ As original.

Measurements:

∙ Inner diameter axle hole:…

Counter Drive VDO Metal with Grease Nipple 17 Inch Puch Monza / Grand Prix

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi wheel, which is connected to the speedometer…

Counter drive VDO Metal with Grease nipple 10mm M10 Half hub Puch MS50 / MS50L / MS50V

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch MS wheel, which is connected to the…

Counter drive VDO Metal with Grease nipple 12mm M10 Puch Maxi

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi wheel, which is connected to the speedometer with a…

Counter drive VDO Metal 12mm M10 Puch Z-One / Manet / Korado

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Magnum X wheel, which is connected to the speedometer with a…

Counter drive VDO Plastic 12mm M10 Original! Puch Maxi

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi wheel, which is connected to the speedometer with a speedometer…

Counter drive VDO Plastic Black 12mm M10 Puch Maxi

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi wheel, which is connected to the odometer with a speedometer…

Counter drive VDO Metal 12mm M10 Puch Rough Rider / Magnum X

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Magnum X wheel, which is connected to the odometer with a…

Counter drive VDO Plastic Black 12mm M10 Puch Monza

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Monza wheel, which is connected to the odometer with a speedometer…

Counter drive Metal 11mm as Original Puch Maxi P1

∙ Speedometer counter drive / counter driver.
∙ This counter driver is mounted on the hub of a Puch Maxi P1 wheel, which is connected to the odometer with a speedometer…

Counter drive Wheel 17 Teeth Puch DS50 / Alabama / Mexico / Etc

∙ Counterdrive Worm wheel.
∙ 17 Teeth.
∙ Suitable for models with 12 Inch wheels.

Suitable for:

∙ Puch DS50.
∙ Puch DS50-4.
∙ Puch DS50V.
∙ Puch…

Counter drive Wheel 22 Teeth Puch MV50 / VS50 / MS50V / MC50 / VZ50

∙ Counterdrive worm wheel.
∙ 22 Teeth.
∙ Inner diameter: 28.5mm.

Suitable for:

∙ Puch MV50.
∙ Puch VS50 (New Models)
∙ Puch MS50V (Models with Full…

Counter drive Wheel ZKW Hub Old Model Puch M50

∙ Counterdrive worm wheel.
∙ For ZKW hub.

Suitable for:

∙ Puch M50 (Old Models)
∙ KTM Models.

Identical to Puch article number

328.1.40.060.1 , P3403

Counter drive Worm ZKW Hub Old Model Puch M50

∙ Counterdrive worm wheel.
∙ For ZKW hub.

Suitable for:

∙ Puch M50 (Old Models)
∙ KTM Models.

Identical to Puch article number

328.1.40.061.1 , P3404

Connection Piece Speedometer Cable Tomos 2L / 3L / Puch MV / VS / VZ / DS / Etc

∙ Odometer connection peace for Counter drive.
∙ Aluminium.
∙ VDO Cable connection (M10 x 1mm)
∙ N.O.S, New Old Stock Original Puch…

Worm Axle Counter drive Tomos 2L / 3L / Puch MV / VS / VZ / DS / Etc

∙ Worm axle counter driver.
∙ Steel.
∙ 12 Teeth.

Measurements:

∙ Diameter: 8mm - 13mm.
∙ Totale length: 35mm.

Suitable for:

∙ Puch MS50V (Full…

Drive Axle Counter drive Tomos 2L / 3L / Puch MV / VS / VZ / DS / Etc

∙ Drive axle counter driver.

Measurements:

∙ Diameter: 3.9mm.
∙ Total length: 39mm.

Suitable for:

∙ Puch MS50V (Full hub)
∙ Puch VS50.
∙ Puch…

Transmission Rubber Puch M50Racing

∙ Transmissionrubber / driving rubber.
∙ Diameter 45mm x 108mm x 15mm.

Suitable for:

∙ Puch M50 Racing.

Identical to Puch article number

368.1.41.831 , 000P4034

Transmission Rubber ZKW Hub Puch M50S / M50SE

∙ Transmissionrubber / driving rubber.

Suitable for:

Models with ZKW rear hub

∙ Puch M50S.
∙ Puch M50SE.

Identical to Puch article number

328.1.41.031.1 , P3419

Transmission Rubber Tomos 4L

∙ Transmissionrubber / mounting rubber.

Measurements:

∙ Diameter: 40mm x 85mm x 15mm.

Suitable for:

∙ Tomos 4L.

Identical to Tomos article number

205.745

Brake cone Coaster Brake Swiing Puch Maxi

∙ Brake cone.
∙ For coaster brake system.
∙ Swiing, Top-Qaulity!

Suitable for:

∙ Puch Maxi Models.

Freewheel Sprocket Esjot A-Qaulity! Puch Maxi

∙ Freewheel sprocket.
∙ Diamond cut sprocket.
∙ 23 Teeth.
∙ 1/2" x 1/8". French screw thread M34.7 x 1mm.
∙ Esjot, A-Qaulity!

Suitable for:

∙ Puch Maxi Models.

Freewheel Sprocket Puch Maxi

∙ Freewheel sprocket.
∙ 23 Teeth.

Suitable for:

∙ Puch Maxi Models.

Ball Bearing set Wheel Hub 4.76mm 144-Pieces Puch Maxi

∙ Ball bearings.
∙ For wheel bearing with loose cups.
∙ Size: 3/16 / 4.7mm.
∙ 144 Pieces.

Suitable for:

∙ Puch Maxi Models.

Ball Bearing set Wheel Hub 5 Star Alloy Cast Wheel Front side 5.56mm 100-Pieces Puch Maxi

∙ Ball Bearings.
∙ For wheel bearings of a 5 star alloy cast wheel front side.
∙ Size: 7/32 / 5.56mm.
∙ 100 Pieces.

Suitable…

Grease nipple Screw thread M6 Puch MV50 / VS50 / DS50 /MS50V / Etc

∙ Grease nipple.
∙ Screw thread: M6.
∙ Grease nipple to lubricate the brake wrench & lubricate the swingarm bushings.

Suitable for:

∙ Puch MS50V (Full…

Grease nipple Clamp fit 6mm Puch MV50 / Etc

∙ Grease nipple.
∙ Clamp fit: 6mm.

Suitable for:

∙ Puch MV50.
∙ Etc.

Identical to Puch article number

360.1.40.011.0 , 000P3760

Grease nipple Clamp fit 6mm Plastic Puch MV / VS / DS / VZ / Etc

∙ Grease nipple.
∙ Plastic model.
∙ Clamp fit: 6mm.

Suitable for:

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch VZ.
∙ Etc.

Identical to Puch article…

Chain Tensioner Puch M50 Racing

∙ Chain tensioner
∙ A Piece.

Suitable for:

∙ Puch M50 Racing.

Original Puch article number

366.1.41.021.1.

Chain Tensioner Puch Magnum X / Monza / Dakota / VZ50 / Etc

∙ Chain tensioner.
∙ Original model.
∙ A Piece.

Suitable for:

∙ Puch Magnum X.
∙ Puch Rough Rider.
∙ Puch MC50.
∙ Puch Monza.
∙ Puch Dakota.
∙ Puch…

Chain Tensioner M6 Puch Magnum

∙ Chain tensioner.
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Length: 60mm.
∙ Diameter axle hole: 13mm.

SUitable for:

∙ Puch Magnum Models.

Chain Tensioner M6 Original Fitment! Puch Maxi

∙ Chain tensioner.
∙ Original fitment.
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Diameter axle hole: 12mm.

Suitable for:

∙ Puch Maxi Models.

Chain Tensioner M6 Puch Maxi

∙ Chain tensioner.
∙ A Piece.

Measurements:

∙ Screw thread: M6.
∙ Diameter axle hole: 12mm.

Suitable for:

∙ Puch Maxi Models.

Wheel Transformer set 17 Inch Grimeca 10-Pieces Black Puch Maxi

∙ Wheel transformers.
∙ 3D Printed.
∙ Black.
∙ Mounting material included
∙ Set for 1 rim (10 Wheel)

Pay attention! Do not overtighten bolts to prevent…

Spoke covers set 24cm 72 pieces Red universal

∙ Spokecovers set.
∙ Length: 240mm (Easy to cut to the correct size)
∙ 72 Pieces (Enough for 2 wheels)
∙ Red.

Suitable for:

∙ Universal to use on various moped models.

Spoke covers set 24cm 72 pieces Blue universal

∙ Spokecovers set.
∙ Length: 240mm (Easy to cut to the correct size)
∙ 72 Pieces (Enough for 2 wheels)
∙ Blue.

Suitable for:

∙ Universal to use on various moped models.

Spoke covers set 24cm 72 pieces Light Blue universal

∙ Spokecovers set.
∙ Length: 240mm (Easy to cut to the correct size)
∙ 72 Pieces (Enough for 2 wheels)
∙ Light Blue.

Suitable for:

∙ Universal to use on various moped models.

Spoke covers set 24cm 72 pieces Yellow universal

∙ Spokecovers set.
∙ Length: 240mm (Easy to cut to the correct size)
∙ 72 Pieces (Enough for 2 wheels)
∙ Yellow.

Suitable for:

∙ Universal to use on various moped models.