Handlebar clamp adapter set Fatbar! 22mm > 28,6mm Rot Doppler universal

∙ Handlebar clamp adapter set.
∙ These adapters allow you to convert a 22mm handlebar to an oversized handlebar with a diameter of 28.6mm (Fatbar…

Handlebar clamp adapter set Fatbar! 22mm > 28,6mm Black Doppler universal

∙ Handlebar clamp adapter set.
∙ These adapters allow you to convert a 22mm handlebar to an oversized handlebar with a diameter of 28.6mm (Fatbar…

Handlebar clamp adapter set Fatbar! 22mm > 28,6mm Silver Doppler universal

∙ Handlebar clamp adapter set.
∙ These adapters allow you to convert a 22mm handlebar to an oversized handlebar with a diameter of 28.6mm (Fatbar…

Headset bearing set complete Puch Maxi S

∙ Headset bearing set.
∙ Complete set with all the parts you need for mounting the front fork in the frame.

Suitable for:

∙ Puch Maxi S.
∙ Models with handlebar mounting on the…

Headset bearing set complete Puch Maxi N

∙ Headset bearing set.
∙ Complete set with all the parts you need for mounting the front fork in the frame.

Suitable for:

∙ Puch Maxi N.
∙ Models with a handlebar with a handle bar stem.

Front fork mounting set A-Qaulity! Buzzetti Puch Maxi S / N / P / K / X30 / Rider Macho / P1 / Z-Two / Etc

∙ Front fork / headset assembly set.
∙ Mounting set required for mounting the front fork in the frame.
∙…

Front fork mounting set Puch Maxi S / N / P / K / X30 / Rider Macho / P1 / Z-Two / Etc

∙ Front fork / headset assembly set.
∙ Mounting set required for mounting the front fork in the frame.

Complete set with:

∙ 2x Bearing…

Swiing Headset bearing set (Puch Maxi S/N/X30)

∙ For Puch Maxi S/N/X30.
∙ Swiing!
∙ Complete set.
∙ Hardened.
∙ Suitable for Race use.
∙ Top-Qaulity!
∙ Inner diameter lower bearing ring:26.8mm.
∙ Outer diameter of…

Balhead set Puch MV/MS/VS

∙ Balhead set.
∙ Complete set.
∙ 5mm ballbearings.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.

Headset bearing conversion kit (Honda fork>Puch frame)

∙ Complete conversion set to mount a Honda MB/MT/MBX/MTX front fork in a Puch Maxi frame (Ideal for a Race and Cross Puch)

Balhead ballbearing set Puch MV/MS/VS (144 Pieces)

∙ Balhoofd kogellager set.
∙ 144 Pieces.
∙ 5mm Ballbearings.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.

Headset bearing conversion bush set (Honda front fork>Puch frame)

∙ Headset bearing conversion bush set.
∙ Bush set to mount a Honda MB/MT/MBX/MTX front fork in a Puch Maxi frame.
∙ Ideal for a Raceor a Cross…

Headset nut (26mm Luxury Stainless steel)

∙ Luxury model.
∙ Diameter:26mm.
∙ Stainless steel.

Headset Nut 26mm Chrome Puch Maxi S

∙ Headset nut.
∙ M26 x 1mm.
∙ ​Chrome.

Geschikt voor:

∙ Puch Maxi Modellen.

Headset nut (26mm Puch Maxi N chrome)

∙ For Puch Maxi N.
∙ Diameter:26mm.
∙ Chrome.

Headset nut (26mm high chrome)

∙ Diameter:26 mm.
∙ High model (16mm)
∙ Chrome.

Headset nut (26mm Luxury chrome)

∙ Luxury model.
∙ Diameter:26mm.
∙ Chrome.

Steering head nut 26mm universal Puch MV/MS/VS/Maxi

∙ Steering head nut.
∙ Chrome.
∙ Diameter:26mm.
∙ Also for universal use.

Suitable for:

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Puch Maxi.

Cone set Headset - Front fork 26mm - 27mm Tomos / Puch Models

∙ Cone set headset - front fork.

Measurements:

∙ Inner diameter: 27mm (26mm with supplied filler ring)

Suitable for:

Puch - Tomos 2, 3 & 4 Gear Models.

∙…

Headset cup Top side Puch MV / MS / VS / Etc

∙ Bearing / headset cup.
∙ Top side.
∙ Headset cup mounted in the frame for the assembly of the front fork.

Measurements:

∙ Outer diameter headset: 32.6mm.
∙ Inner diameter…

Headset cup Bottom side Puch MV / MS / VS / Etc

∙ Bearing / headset cup.
∙ Bottom side.
∙ Headset cup mounted in the frame for the assembly of the front fork.

Measurements:

∙ Outer diameter headset: 32.6mm.
∙ Inner…

Adjusting nut Headset M26x1 Puch MV / MS / VS / Etc

∙ Headset asjusting nut / headsetnut.
∙ With notches.
∙ Screw thread: M26x1.
∙ Placed over the headset bearing set top side.

Suitable for:

Puch Shift models.

∙ Puch…

Dust cover Headset Puch MV / MS / VS / Etc

∙ Headset dust cover.
∙ Placed over the headset bearing set top side.

Suitable for:

Puch Shift models.

∙ Puch MV.
∙ Puch MS.
∙ Puch VS.
∙ Tomos 2L.
∙ Tomos 3L.
∙ Tomos…

Ballhead ring (Vertical)

∙ Comes between the lower bearing shell and the front fork pin.

Ballhead bearing Buzetti (Puch Maxi S/N/X30)

∙ For Puch Maxi S/N/X30.
∙ Buzetti.
∙ Top-Qaulity.
∙ 26.5mm.

Shimring headset nut / crown plate 3.0mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 3.0mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Shimring headset nut / crown plate 2.0mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 2.0mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Shimring headset nut / crown plate 1.0mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 1.0mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Shimring headset nut / crown plate 0.5mm

∙ Shimring.
∙ To use to fill up the space below the headset locking nut or the crown plate.
∙ VDM.

Measurements:

∙ Thickness: 0.5mm.
∙ Outer diameter: 38mm.
∙ Inner diameter: 26mm.

Crown plate O-Ring

∙ A Piece.
∙ This O-Ring comes between the upper crown plate and the ball head nut.

Steering lock 15mm Puch MS50 / VS50 / DS50

∙ Steering lock.
∙ Complete with 2 keys.

Measurements:

∙ Diameter lock: 15mm
∙ Total length: 25mm.

Suitable for:

Models from +/-1954 till +/-1966.

∙ Puch MS50.
∙ Puch…

Steering lock as original complete 12mm/8mm Puch Maxi/MV/Etc

∙ Steering lock.
∙ As original.
∙ Complete with spring and nail.
∙ Diameter:12mm with 8mm pin.
∙ With 2 golden keys with Puch logo.

Suitable for:

∙ Puch…

Steering lock 12mm A-Qaulity! complete Puch Maxi/MV/VS/Etc

∙ Steering lock/handlebar lock.
∙ A-Qaulity!
∙ Complete with spring, nail and cap.
∙ Diameter:12mm with 8mm pin.
∙ With 2 numbered keys.

Suitable for:

∙…

Steering lock 12mm Puch Maxi/MV/VS/Etc

∙ Steering lock.
∙ Diameter:12mm with 8mm pin.
∙ With 2 keys.

Suitable for:

∙ Puch Maxi.
∙ Puch MV.
∙ Puch VS.
∙ Etc.

Steering lock 12mm black key Puch Maxi/MV/VS/Etc

∙ Steering lock.
∙ Diameter:12mm with 8mm pin.
∙ With 2 black keys.

Suitable for:

∙ Puch Maxi.
∙ Puch MV.
∙ Puch VS.
∙ Etc.

Steering lock 12mm / 10mm Black Keys Puch Monza / Dakota

∙ Steeringlock.
∙ Complete with 2 black keys and spring.

Measurements:

∙ Diameter lock: 12mm
∙ Diameter pin: 10mm.
∙ Length total: 38.70mm.

Suitable for:

∙…

Steering lock 10mm Puch Monza

∙ Steering lock.
∙ Diameter:10mm.
∙ With 2 keys.

Suitable for:

∙ Puch Monza.

Steering lock 15.8mm - 10mm Tomos 2L / 3L / 4L

∙ Steering lock.
∙ Complete with 2 keys.

Measurements:

∙ Diameter lock: 15.8mm
∙ Diameter pin: 10mm.

Suitable for:

∙ Tomos 2L.
∙ Tomos 3L.
∙ Tomos 4L (Old…

Steering lock caps oval and round (Puch Maxi/MV/VS)

∙ For Puch Maxi/MV/VS etc.
∙ Set contains a round and oval cap.

Notch nail with ring for steering lock (Puch Maxi/MV/VS)

∙ Diameter pin:2.75mm.
∙ Diameter head:5mm.
∙ Length:10mm.

Notch nail steering lock Univeral / Puch Maxi / MV / Monza / Etc

∙ Notch nail steering lock

Measurements:

∙ Diameter stift: 2.50mm.
∙ Diameter head: 4.50mm.
∙ Length: 10mm.

Suitable for:

∙ Puch Maxi.
∙ Puch…

Spring steering lock Univeral / Puch Maxi / MV / Monza / Etc

∙ Spring steering lock

Suitable for:

∙ Puch Maxi.
∙ Puch Monza.
∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch VZ
∙ Puch Alabama.
∙ Puch Dakota.
∙ Puch…

Top Bolt Inner leg Front fork M22 x 1mm Puch Monza / VZ50 / M50

∙ Top bolt.
∙ For inner leg front fork.
∙ M22 x 1mm.
∙ A Piece.

Suitable for:

∙ Puch Monza.
∙ Puch VZ50.
∙ Puch M50.

Identical to Puch article…

Center Bolt Triple clamp Front fork M21 x 1mm Puch Monza / VZ50 / M50 / MC50

∙ Center bolt.
∙ For top plate / triple clamp front fork.
∙ M21 x 1mm.
∙ A Piece.

Suitable for:

∙ Puch Monza.
∙ Puch VZ50.
∙ Puch…

Revision set front fork Puch MS50 / MS25 / Etc

∙ Overhaul kit front fork.
∙ Complete set to overhaul your front fork.

Complete set with:

∙ 2X Felt strip.
∙ 2x Felt rings.
∙ 2x Oil seals.
∙ 2x O-Rings.

Suitable…

Revison set front fork with guide bushes Puch MS50 / MS25 / Etc

∙ Overhaul kit front fork.
∙ Complete set to overhaul your front fork.

Complete set with:

∙ 2x Guide bushes top.
∙ 2x Guide bushes bottom.
∙ 2X Felt…

Revision set front fork 20-Pieces Puch Monza / N50

∙ Overhaul kit front fork.
∙ Complete set to overhaul your front fork.
∙ 20-Pieces.

Suitable for:

∙ Puch Monza.
∙ Puch N50.

Revision set front fork with guide bushes Puch MV / VS / MS / Florida

∙ Overhaul kit front fork.
∙ Set with guide bushes.
∙ Complete set to overhaul your front fork.

Complete set with:

∙ 2x Wide guide bushes, 27,6 x 22…

Revision set front fork with guide bushes Tomos / Puch Models

∙ Overhaul kit front fork.
∙ Set with guide bushes.
∙ Complete set to overhaul your front fork.

Complete set with:

∙ 2x Wide guide bushes, 29,6 x 25 x…

Guide bush set front fork complete Puch MV50/VS50/VZ50/M50

∙ Guide bush set front fork.
∙ Set off 4 pieces.

Measurements:

∙ 2x Top bush:29.5/25/26mm.
∙ 2x Bottom bush:28/23/26mm.

Suitable for:

∙ Puch MV50.
∙ Puch…

Shock absorber Bush Front side 145mm Chrome A-Qaulity! Tomos 2L / 3L / 4L / Puch MV / DS / VS / Etc

∙ Shock absorber bush.
∙ Frontside.
∙ Chrome.
∙ Handicraft, A-Qaulity!
∙ A Piece.

Measurements:

∙ Length:…

Shock absorber Bush Front side 145mm Chrome Tomos 2L / 3L / 4L / Puch MV / DS / VS / Etc

∙ Shock absorber bush.
∙ Frontside.
∙ Chrome.
∙ A Piece.

Measurements:

∙ Length: 145mm.
∙ Outer diameter: 42mm.
∙ Inner…

Shock absorber Bush Front side 138mm Chrome A-Qaulity! Puch VS50 1957

∙ Shock absorber bush.
∙ Frontside.
∙ Chrome.
∙ Handicraft, A-Qaulity!
∙ A Piece.

Measurements:

∙ Length: 138mm.
∙ Outer diameter: 42mm.
∙…

Shock absorber Bush Front side 120mm Chrome A-Qaulity! Puch MS50 / MS50L / MS50V

∙ Shock absorber bush.
∙ Frontside.
∙ Chrome.
∙ Handicraft, A-Qaulity!
∙ A Piece.

Measurements:

∙ Length: 120mm.
∙ Outer diameter:…

Shock absorber Bush Front side 120mm Chrome Puch MS50 / MS50L / MS50V

∙ Shock absorber bush.
∙ Frontside.
∙ Chrome.
∙ A Piece.

Measurements:

∙ Length: 120mm.
∙ Outer diameter: 37mm.
∙ Inner diameter:…

Shock absorber Bush Front side Chrome - Inlet 185mm Puch VZ50 / M50

∙ Shock absorber bush.
∙ Frontside.
∙ 185mm.
∙ Chrome model with inlet.

Measurements:

∙ Length: 185mm.
∙ Outer diameter: 42mm.
∙ Inner diameter:…

Shock absorber Bush Front side 185mm Chrome Puch DS50 / Alabama

∙ Shock absorber bush.
∙ Frontside.
∙ Chrome.
∙ A Piece.

Measurements:

∙ Length: 185mm.
∙ Outer diameter: 45mm.
∙ Inner diameter: 43mm.

Geschikt…

Shock absorber Bush Front side 185mm Chrome Puch VZ50 / MC50

∙ Shock absorber bush.
∙ Frontside.
∙ 185mm.
∙ Chrome.

Measurements:

∙ Length: 185mm.
∙ Outer diameter: 42mm.
∙ Inner diameter: 40mm.

Geschikt…

Bushing Front fork Hydraulic 168mm Chrome Puch Maxi P1 / Z-Two

∙ Front fork bushing.
∙ Chrome.
∙ A Piece (2 Needed)

Measurements:

∙ Length: 168mm.
∙ Inner diameter: 40mm.
∙ Outer diameter: 42mm.

Suitable…

Rubber for chrome bush front fork long model Puch MV / VS / VZ / MC / Florida / Etc

∙ Rubber.
∙ Long model.
∙ For chrome front fork bush

Measurements:

∙ Outer diameter: 40.5mm
∙ Inner diameter: 28.5mm.
∙ Height:…

Rubber for chrome bush front fork short model Puch VZ50 / Dakota / Etc​

∙ Rubber.
∙ Short model.
∙ For chrome front fork bush

Measurements:

∙ Outer diameter: 40.5mm
∙ Inner diameter: 28.5mm.
∙ Height:…

Guide bush front fork top Puch MV50/VS50/VZ50/M50

∙ Guide bush front fork.
∙ Top side.

Measurements:

∙ Outer diameter:29,5mm
∙ Inner diameter:25mm.
∙ Heigth:26mm.

Suitable for:

∙ Puch MV50 (With wide front…

Guide bush front fork bottom Puch MV50/VS50/VZ50/M50

∙ Guide bush front fork.
∙ Bottom side.

Measurements:

∙ Outer diameter:28mm
∙ Innner diameter:23mm.
∙ Heigth:26mm.

Suitable for:

∙ Puch MV50 (With wide front…

Oil seal front fork 30mm x 21.5mm x 5.0mm Tomos / Puch Models

∙ Oil seal / front fork seal.
∙ Suitable for inner front fork legs with a diameter of 22mm.

Measurements:

∙ Outer diameter: 30mm.
∙ Inner diameter:…

Oil seal front fork 33.5mm x 25.5mm x 5.5mm Puch MV / VS / MS / Florida

∙ Oil seal / front fork seal.
∙ Suitable for inner front fork legs with a diameter of 25mm.

Afmetingen:

∙ Outer diameter: 33.5mm.
∙ Inner diameter:…

Oil seal front fork 36mm x 25.5mm x 5.5mm Puch Monza / Grand Prix / N50

∙ Oil seal / front fork seal.
∙ Suitable for inner front fork legs with a diameter of 25mm.

Measurements:

∙ Outer diameter: 36mm.
∙ Inner diameter:…

Rubber gasket front fork Puch Monza/VZ/M50

∙ Rubber gasket front fork.

Measurements:

∙ Outer diameter: 39mm.
∙ Inner diameter: 31.5mm.
∙ Height: 3.7mm.

Suitable for:

∙ Puch Monza.
∙ Puch VZ.
∙ Puch M50.

0-Ring front fork Puch MV/MS/VS

∙ O-Ring.
∙ Placed on the bottom of the inner leg.
∙ 5.3mm x 2.4mm.

Suitable for:

∙ Puch MS50.
∙ Puch MS50L.
∙ Puch MS50V.
∙ Puch VS50.
∙ Puch MV50.
∙ Puch VZ50.

Felt strip front fork Puch MV50/VS50/MS50

∙ Felt strip front fork.

Suitable for:

∙ Puch MV50.
∙ Puch VS50.
∙ Puch MS50.

Felt washer front fork 32,5mm Puch MV50/VS50

∙ Felt washer front fork.

Measurements:

∙ Outer diameter:32,5mm

Suitable for:

∙ Puch MV50.
∙ Puch VS50.

Felt washer front fork 29mm Puch MS50/MS50L/MS50V

∙ Felt washer front fork.

Measurements:

∙ Outer diameter:29mm
∙ Innner diameter:22mm.
∙ Heigth:6mm.

Suitable for:

∙ Puch MS50 (With small front fork)
∙ Puch MS50L…

Speedometer VDO Replica 60Km/h 48mm Universal

∙ Speedometer.
∙ Black dial.
∙ Fits in all Puch Maxi headlights with a speedometer hole.
∙ VDO Connection.
∙ Till 60km/h.
∙ Diameter: 48mm.

Suitable for:

∙ Universal…

Speedometer VDO Replica 100Km/h 48mm Universal

∙ Speedometer.
∙ VDO replica.
∙ Till 100km/h.
∙ Black / White dail.
∙ Diameter: 48mm.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch Maxi.
∙ Puch…

Speedometer VDO Replica 60Km/h 48mm Universal

∙ Speedometer.
∙ VDO replica.
∙ Till 60km/h.
∙ Black / White dail.
∙ Diameter: 48mm.

Suitable for:

∙ Universal to use on various moped models.
∙ Puch Maxi.
∙ Puch…

Speedometer White dial 80km/h 48mm Universal

∙ Speedometer.
∙ White dial.
∙ Fits in all Puch Maxi headlights with a speedometer hole.
∙ VDO Connection.
∙ Till 80km/h.
∙ Diameter: 48mm.
∙ With BA7S light bulb…

Speedometer Black dial 100Km/h 60mm Universal

∙ Speedometer.
∙ Black dial.
∙ VDO connection.
∙ Till 100km/h.
∙ Diameter: 60mm.

Suitable for:

∙ Universal to use on various moped models.

Speedometer Black dial 120Km/h 60mm Universal

∙ Speedometer.
∙ Black dial.
∙ VDO Connection.
∙ Till 120km/h.
∙ Diameter: 60mm.

Suitable for:

∙ Universal to use on various moped models.

Speedometer White dial 80Km/h 60mm Universal

∙ Speedometer.
∙ VDO connection.
∙ Till 80Km/h.
∙ White dial.
∙ Diameter: 60mm.
∙ With light connection, without BA7 light bulb (You can use 6V or 12V)

Suitable for:

∙…

Tachometer Black 60mm Puch Monza / Universal

∙ Tachometer.
∙ Replica Top-Qaulity!
∙ 12 Volt 1.2 Watt light.
∙ Diameter: 60mm.
∙ This tachometer works only with standard Bosch ignitions 6 or 12 volts.

Instructions:

∙…