Clutch cover Black Puch Dart / Mini Maxi

∙ Clutchcover.
∙ Black.
∙ Bare.

Suitable for:

∙ Puch Dart.
∙ Puch Mini maxi.

Clutch / Crankcase Cover NOS Original! Tomos 4L / APN-4 / AT50 / ATX50 / NTX50

∙ Clutchcover / Crankcase cover.
∙ NOS, Original Tomos part!

Suitable for:

∙ Tomos 4L.
∙ Tomos APN-4
∙ Tomos AT50.
∙ Tomos ATX50.
∙…

VDMRacing Kickstart conversion kit with sprocket chrome Top-Qaulity! Puch e50

∙ Kickstart conversion kit.
∙ With this set you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙ Chrome…

VDMRacing Kickstart conversion kit chrome Top-Qaulity! Puch e50

∙ Kickstart conversion kit.
∙ With this set you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙ Chrome conversion…

VDMRacing Conversion plate kickstart conversion kit chrome Top-Qaulity! Puch e50

∙ Conversion plate.
∙ With this conversion plate you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

VDMRacing Clutch bell plate kickstart conversion kit Top-Qaulity! Puch e50

∙ Clutch bell plate.
∙ With this clutchbell plate you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

Pressure Plate Clutch Kickstart Puch e50

∙ Pressure plate.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

Identical to Puch article number

349.1.12.305.1

Sprocket Clutch Kickstart Puch e50

∙ Sprocket.
∙ This part is mounted on the clutch of a Puch e50 kickstart engine.

Suitable for:

∙ Puch Maxi e50 kickstart engines.

VDMRacing Crankshaft nut kickstart conversion kit Top-Qaulity! Puch e50

∙ Crankshaft nut.
∙ With this crankshaft nut you can easily convert a Puch e50 push-start / pedal-start engine to a kickstart engine.
∙…

Mounting bolt set M6 kickstart conversion set 5-Pieces Puch e50

∙ Mounting bolt set.
∙ Set to assemble a kickstart conversion kit on a Puch e50 engine.
∙ 5-Pieces.

Suitable for:

∙ Puch e50 Push-start / Pedal-start engine.

Key kickstart / pedals 9.5mm / 43mm Puch Maxi / Citta / Vespa

∙ Key.
∙ 9.5mm model.
∙ This part is used for mounting a kickstart pedal or pedal arm.
∙ Universal.

Measurements:

∙ Diameter: 9.5mm.
∙ Length:…

Key kickstart / pedals 9.0mm / 43mm Puch Maxi / Citta / Vespa

∙ Key.
∙ 9.0mm model.
∙ This part is used for mounting a kickstart pedal or pedal arm.
∙ Universal.

Measurements:

∙ Diameter: 9.0mm.
∙ Length:…

Rubber Kickstart pedal Puch Maxi e50 / ZA50 / Z50

∙ Rubber kickstartpedal.
∙ Black.

Measurements:

∙ Length: 65mm.
∙ Inner diameter: 8mm.
∙ Outer diameter: 15mm.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.
∙…

Kickstart pedal set Straight Black 3-Pieces Puch Maxi e50

∙ Kickstartpedal set.
∙ Straight model.
∙ Black.
∙ 3 Pieces.

Complete set met:

∙ Kickstartpedal Black.
∙ Rubber with Puch print.
∙ Mounting key.

Suitable…

Kickstart pedal Straight Chrome Puch Maxi e50

∙ Kickstartpedal.
∙ Straight model.
∙ Chrome.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.

Spring Kickstart Cover Puch Maxi e50

∙ Kickstartspring.
∙ This spring is mounted in the kickstart clutch cover. and ensures that the kickstart pedal comes back up after starting.

Note! Photo 2 is a example photo.

Suitable…

Spring holder Kickstart cover Plastic Puch Maxi e50

∙ Kickstart springholder / kickstartring.
∙ This spring holder is mounted in the kickstart clutch cover. and ensures that the spring remains in position.
∙ Plastic.

Note!…

Rubber Kickstart pedal with Puch Print Puch Maxi e50 / ZA50 / Z50

∙ Rubber kickstartpedal.
∙ Model with Puch print / logo.

Measurements:

∙ Length: 65mm.
∙ Inner diameter: 8mm.
∙ Outer diameter: 15mm.

Suitable…

Shim washer Kickstart Cover 14mm x 10mm x 0.5mm Puch Maxi e50

∙ Shimwasher kickstart clutchcover.
∙ Placed on both Sprockets that fall into the crankcase.
∙ A Piece.

Measurements:

∙ 14mm x 10mm x 0.5mm.

Note! Photo 2…

Fibre washer Oil Fill plug Puch Maxi e50

∙ Fibrewasher oil fillplug.
∙ Placed in the clutch cover.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Clutch Lever Puch Maxi e50

∙ Lever clutch.

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start Engines.

Circlip Axle clutch Puch Maxi e50

∙ Circlip clutch lever / clutch axle.
∙ For securing the clutch lever on the clutch axle.

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start Engines.

Bolt set Clutch cover Kickstart Allen 5-Pieces Puch Maxi e50

∙ Mounting bolt set Kickstart clutchcover.
∙ M6 Allen model.
∙ 5 Pieces.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.

Torsion spring Axle clutch Puch Maxi e50

∙ Torsionspring clutch axle.

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start Engines.

Original Puch article number

350.3.12.022.1

Bolt set Clutch cover Push-start / Pedal-start Crosshead 4-Pieces Puch Maxi e50

∙ Mounting bolt set Push-start / Pedal-start clutchcover.
∙ M6 Crosshead model.
∙ 4 Pieces.

Suitable for:

∙ Puch Maxi e50 Push-start /…

Rubber ring Axle clutch Puch Maxi e50

∙ Rubberring clutch lever / clutch axle.
∙ Placed below the clutchlever on the clutch axle.

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start Engines.

O-Ring Axle clutch Puch Maxi e50

∙ O-Ring clutch axle.

Suitable for:

∙ Puch Maxi e50 Push-start / Pedal-start Engines.

Original Puch article number

350.3.12.022.1

Oil Fill plug / Drain plug set Puch Maxi e50

∙ Oilfill / Drainplug set.

Complete set with:

∙ 1x Oil fill plug.
∙ 1x Fibre washer Oil fill plug.
∙ 1x Oil Drain plug.
∙ 1x Fibre washer Drain plug.

Suitable for:

∙…

Oil Fill plug Puch Maxi e50

∙ Oilfill plug.
∙ Placed in the clutch cover.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Spring Sprocket Kickstart cover Tomos A35 / A55 / Puch Maxi Z50 / e50

∙ Kickstart sprocket / Kickstartspring.
∙ This spring is mounted in the kickstart clutch cover on the outgoing gear.

Note! Photo 2 is a example…

Oil Fill plug Remake Kickstart cover Puch Maxi e50

∙ Olie vul bout.
∙ Suitable for the Remake kickstart clutch cover.
∙ A Piece.

Suitable for:

∙ Puch Maxi e50 Models.

Start Mechanism set 3-Pieces Swiing Top-Qaulity! Puch ZA50

∙ Startunit / Start mechanism set.
∙ 3 Pieces.
∙ Swiing, Top-Qaulity!

Complete set with:

∙ Guide nut.
∙ Pull bolt.
∙ Starter cable.

Suitable for:

∙ Puch ZA50 Engines.

Oil Fill plug Grey Tomos / Puch Z50 / ZA50 / 2V / 3V / 4V

∙ Oil fillplug.
∙ Rubber.
∙ Grey.
∙ A Piece.

Suitable for:

2, 3 & 4 Gear Engines.

∙ Puch Maxi Z50.
∙ Puch Maxi ZA50.
∙ Puch MV50.
∙ Puch MS50L.
∙ Puch…

Oil Fill plug Black Tomos / Puch Z50 / ZA50 / 2V / 3V / 4V

∙ Oil fillplug.
∙ Rubber.
∙ Black.
∙ A Piece.

Suitable for:

2, 3 & 4 Gear Engines.

∙ Puch Maxi Z50.
∙ Puch Maxi ZA50.
∙ Puch MV50.
∙ Puch MS50L.
∙…

Grommet Start mechaniscm / Brake light Switch Puch ZA50

∙ Grommet / Rubber.
∙ For startmechanism, brakelight switch & sparkplug cable.

Measurements:

∙ Length: 45mm.
∙ Diameter: 19mm > 10mm.

Suitable for:

∙ Puch ZA50 Engines.

Bushing Kickstart pedal Puch Z50

∙ Bushing / Spacer.
∙ Placed in the kickstartpedal / Cotter pin key.

Measurements:

∙ Outer diameter: 12mm.
∙ Inner diameter: 10mm.
∙ Height: 7.5mm.

Suitable for:

∙ Puch Z50 Engines.

Clutch Lever New Model Tomos 2L / 3L / Puch MV / VS / MS / Etc

∙ Lever clutch.
∙ New model.
∙ Aluminium.

Suitable for:

Puch 2, 3 & 4 Gear Engines.

∙ Puch Z50 2-Speed.
∙ Puch MV50.
∙ Puch MS50(L).
∙ Puch…

Mounting set Kickstart pedal Puch Magnum X

∙ Mountingset kickstartpedal.
∙ To mount a turnable kickstart pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch Rough Rider.

Gear Axle Chrome Puch Z50

∙ Gearaxle.
∙ With this Gear axle can the shift lever (inner) and the shift arm (outer) be mounted on the engine.
∙ Chromed.

Suitable for:

∙ Puch Z50 Engines.

Original Puch article…

Axle Clutch lever Hardened Push-start / Pedal-start Puch Maxi e50

∙ Clutchlever axle.
∙ Hardened.

Measurements:

∙ Length: 79.2mm.
∙ Diameter: 13.95mm.

Suitable for:

∙ For Puch Maxi e50 Push-start / Pedal-start…

Hub Kickstart pedal Puch MC125 / Magnum X

∙ Hub kickstartpedal.
∙ To mount a turnable kickstar pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch Rough Rider.
∙ Puch MC125.

Identical to Puch article number

364.1.13.341.1

Kickstart pedal Bended Chrome Puch Maxi e50 / ZA50 / Z50

∙ Kickstartpedal.
∙ Bended model.
∙ Chrome.

Suitable for:

∙ Puch Maxi e50 Kickstart Engines.
∙ Puch Maxi ZA50 Kickstart Engines.
∙ Puch Maxi Z50 Kickstart…

Ball / Spring kickstart pedal Puch M50 / MC125 / Magnum X

∙ Ball / Spring kickstartpedal.
∙ To mount a turnable kickstart pedal.

Suitable for:

∙ Puch Magnum X.
∙ Puch MC125.
∙ Puch M50.

Identical to Puch article…

Kickstart Stop Kickstart pedal Puch 4 Gears

∙ Kickstartstop.
∙ Length: 60mm.

Suitable for:

4 Gear Models

∙ Puch DS50-4.
∙ Puch DS50V.
∙ Puch VZ50 (Met kort kickstart-pedal)

Original Puch article number

364.1.13.343.0

Key Kickstartpedal 9mm x 63mm Puch DS / VZ / R / M / SE / MC125 / MC175 / Etc

∙ Kickstartkey / Key kickstart pedal.
∙ For engines with kickstart stop to the outside

Measurements:

∙ Diameter: 9mm.
∙ Length: 63mm.
∙…

Rubber Gear Pedal Black with Logo Puch Footgear

∙ Rubber gearpedal.
∙ Black.
∙ With Puch logo.

Suitable for:

Puch Models with Footgear.

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Monza.
∙ Puch Ranger.
∙…

Rubber Gear Pedal Black Remake Puch Footgear

∙ Rubber gearpedal.
∙ Black.
∙ Remake.

Suitable for:

Puch Models with Footgear.

∙ Puch MV.
∙ Puch VS.
∙ Puch DS.
∙ Puch Monza.
∙ Puch Ranger.
∙ Etc.

Gear Pedal as Original Puch MV50 / VZ50 / MC50 / Florida

∙ Gearpedal.
∙ Model as original.
∙ Aluminium.
∙ Note! may contain minor damage.

Measurements:

∙ Diameter mounting hole: 13mm.
∙ Length: 120mm -…

Gear Pedal Puch Monza / Grand prix / M50 Racing

∙ Gearpedal.
∙ Aluminium.

Suitable for:​

4 Gear Footgear Engines.

∙ Puch Monza.
∙ Puch Grand prix.
∙ Puch M50 Racing.